Free shipping on orders €99 and over.

0

Your Cart is Empty

September 01, 2020

If you are a curious rider,  you  surely know that Kevlar is a material that is used in many areas, including the most advanced motorcycle gear. This fiber (originally patented by DuPont) is a polyamide that is used for example in the manufacture of bulletproof vests, due to its high resistance to impact, stabbing and heat. It is 5 times stronger than steel (at the same weight).

In the motorcycle industry, its implementation often goes unnoticed. For that  reason it is important to look at the safety materials used in the motorcycle clothing that we are looking for. 4 uses of Kevlar in motorcycle clothing will be explained below.

1. Kevlar shirt

Kevlar flannel shirts are becoming more and more popular in spring and summer when it comes to urban motorcycling. The reason? When the weather is good we are too lazy to take the motorcycle jacket for short trips. Thus, you can wear the kevlar shirt discreetly, feeling the air during the trip while being protected for 12 meters from the abrasion of the road in the event of a fall.

Andromeda Makemake Shirt has a fully Kevlar coated interior, as well as having homologated protections on the shoulders, elbows and back.

2. Motorcycle suits

Within motorcycle clothing, motorcycle suits meet the highest safety requirements (or at least should meet) due to their sporting use. A good motorcycle suit should be made out of the required materials to reach the maximum level of resistance (AAA). Among them, there should be Superfabric, the most resistant material, and Kevlar.

In the case of the Andromeda NearX suit, all the available high tech fabrics have been used, in addition to the protectionsCritical areas have been reinforced with Superfabric® (which is 14 times more resistant to tearing than leather) and a double layer that combines high resistance synthetic leather and a full Kevlar lined interior.

You can see it here.

kevlar in motorcycle clothing

3. Pants and jackets

Can you imagine going to the office on a motorcycle with pants that at first sight seem normal, but in the event of an accident  would resist the abrasion of the road? There is an increasing demand for pants made with Kevlar, either in a denim look or in another style. The same happens with jackets, because there is a greater demand for urban motorcycle clothing.

4. Motorcycle gloves

Most of the cheap gloves on the market just use leather and knuckle protectors. Although they may protect us from abrasion to a certain extent, they are certainly not the best option when it comes to safety. If you are going to use the motorcycle for more than casual use, it is best to be equipped with gloves with more protections and better materials.

Superfabric® should be integrated, in this case to protect the phalanges and the palm of the hand. In addition, Kevlar in motorcycle clothing offers greater resistance to abrasion. In the case of the Andromeda Meteor gloves, they are covered with an inner Kevlar mesh, both on the top and the bottom.

 



Also in Blog

The opening was a success!
The opening was a success!

March 22, 2023

We are opening our first store. You are invited!
We are opening our first store. You are invited!

February 28, 2023

CO2 emission
How much CO2 emission have we offset in 2022? We have data

February 28, 2023

[[recommendation]]